JCR TRACTOR MOUNTED DRILLS
drillingrigs
   
JCR DrillsolJCR Drillsol
BROWSE OUR PRODUCTS
 
 
jcr

JCR TM400 DTHR

TRACTOR MOUNTED DRILLING RIGS
TRACTOR MOUNTED DRILLING RIGS MODEL JCR TM400 DTHR
DETAILED TECHNICAL SPECIFICATION
Description
JCR TM400, DTHR is a Tractor drilling rig mounted on a tractor model New Holland 7500 4WD (75HP) (274309) with Top Drive all Hydraulically Operated Drilling Rig extracting main power from Tractor Engine, is capable of drilling using DTH method to Depth of 150 Mtrs.
DTH DRILLING CAPACITY
a) 4 ½” (115mm) dia holes upto a depth of 150 mtrs in Rock Formation.
b) 6 ½” (165mm) dia holes upto a depth of 125 mtrs in Rock Formation.
c) 8 ½” (216mm) dia holes upto a depth of 30 mtrs in Soil/Unconsolidated.
d) 9 7/8” /12 ¼” dia holes with R.R. Bits up to a depth of 20 Mtrs by Rotary method.
Please Note the above drilling depths are considered under favorable drilling conditions only.
MAST STRUCTURES
Sturdy structural channel type mast of welded construction, main members made out of heavy duty structural steel channels reinforced with suitable cross members, with Mast length of 5500 mm, Rotary head travel of 4500mm, centralizer Opening of 254mm i.e. (10 inches) and Raising and lowering with the help of Hydraulic Cylinder.
TOP HEAD ROTARY DRIVE
Heavy duty hydraulically driven top head drive with mud swivel travels on the mast constructed to with stand the drilling shock loads its speed ranges from 0-100 rpm and torque of 235 kgf/M.
FEED SYSTEM
Feed system is provided with adequate travel for handling drill pipes up to 3 Mtrs Long. The feed and hoist are actuated by a suitable hydraulic cylinder with wire rope and pulley arrangement. The feed system has a Pull up force of 5000 kgf i.e.(1100 Pounds), pull down force of 3000kgf i.e.( 6600 Pounds, pull up speed of 15M/Min pull down speed of 34 M/Min and Reeving Ratio i.e. (wire rope) of 1:2.
The feed system will be incorporated with hold back arrangement to control and limit weight on bit, rapid and slow feed arrangement to suit the variable ground conditions.
HYDRAULIC SYSTEM
Hydraulic System has a Capacity of Maximum Operating Pressure of 160 kg/cm2with a Hydraulic Tank Capacity of 300 Lts, Filtration(Nom) Return line of 10 microns and a Hydraulic Oil Cooler of 40GPM 2250 PSI(Fin type oil to Air).
PRIME MOVER
Power required for the rig Hydraulics shall be drawn from the tractor engine (75 HP) (274309) through P.T.O.
STABILIZERS
System consists of three Hydraulics levelling jacks with reverse flow restricted valves to ensure safe operation. Two numbers are at the front (Operator) of the rig controlled by two separate valves and one jack in the rear side of the rig controlled by a single valve.
BREAKOUT WRENCH
The Drill Rig is equipped with 350mm Stroke of 80mm Bore Hydraulically operated break out wrench for breaking drill pipes.
WATER INJECTION PUMP
The drill rig will be provided with hydraulically operated triplex Reciprocating pump of capacity 50 lpm 1000psi for injecting water/foam with necessary piping and flow control valve.
AIR COMPRESSOR
Trailor Mounted of 650cfm/200 psi capacity can be used for carrying out the DTH drilling activity with suitable toeing arrangement.
AIR LINE LUBRICATOR
Air line lubricator capacity of 900cfm/200psi shall be mounted for the supply of lubricating oil to the hammer.
MUD PUMP
Drill Rig will be provided with 8HP Diesel Driven 3”X3” Capacity centrifugal pump mounted on Skid along with 3” suction, 1 ½” pressure and drain hoses.
www.drillingrigs.co.in | www.dthhammers.net | www.mudpump.co.in | www.drillrods.net | www.dthbuttonbits.net | www.rockdrillhoses.com | www.submersiblepumpsandmotors.com | www.drillingaircompressors.com | www.drillingoperators.com | www.drillingrigsforsale.in | www.rotarydrillingrigs.com | www.downthehole.in | www.waterwelldrillingrigs.com | www.useddrillingrigs.co.in | www.dthdrillingrigs.com

Dth Drilling Rigs | Rotary Drilling Rigs | Combination Drilling Rigs | Dth Cum Rotary Drilling Rigs | Blast Hole Drilling Rigs | Core Drilling Rigs | Wagon Drills | Tractor Mounted Drilling Rigs | Reverce Circulation drilling Rigs| Inwell Drilling Rigs | Trailer Mounted Drill Rig | Self Propelled Skid Mounted Rig | Diamond Core Drilling Rig | Mini Truck Mounted Drilling Rig | Hydro Facturing Equipments | Auto Loader DTH Drilling Rig | Hand Pump Drilling Rigs | Trolley Mounted Drill Rigs | Portable Drilling Rigs | Crawler Mounted Down the Hole | Water Well Drilling Rig | Hydraulic Down the Hole (Dth)Drilling Rig | Horizontal Drilling Rigs | Dual Rotary Drilling Rigs | Hydra Drills | Auger Drills | Soil Investigation Drilling Rigs | Foundation Drilling Rigs | Geothermal Drilling Rigs

Terms & Conditions - Disclaimer Copyright © 2009 dthrotarydrilling.com All rights reserved.