drillingrigs
   
 
 


Drilling Rigs
Truck Mounted Drilling Rigs - KLR Make CDR 600, Core Cum DTHR Combination Drilling Rig
Technical Specifications
General
KLR make, Model CDR 600, truck mounted diamond core drill rig, Top drive all hydraulically operated CORE drill rig. This rig is capable of drilling in any kind of medium to hard soil formation for mineral sample extraction to a depth of 600 Mt. (2000 Ft), this rig is capable of drilling in medium to hard soil formation using DTH and unconsolidated, clay formation using rotary method under favorable drilling conditions the following are the detailed specifications. DTH Drilling

Drill Hole Diameter 165 MM 6.5 (Inches)
Max Drilling Depth 450 Mts 1,500 Feet
Max Drilling Diameter 203.2 MM 8 Inches
Max Drilling Depth 300 Mt 1,000 Feet
Max Drill Pipe Diameter 114.3 MM 4.5 Inches
Max Drill Pipe Wall Thickness 8.9 MM 0.33 Inches
Max Drill Pipe Length 4.5 mts 15 feet

Note: Under favorable Drilling conditions.
Rotary Drilling

Max drill hole diameter 203 MM 8 Inches.
Max drilling depth 500 Mts 1,650 Feet
Max diameter (reaming) 270 MM 10 5/8 Inches

Note: Under favorable Drilling conditions.
Core Drilling
Drilling Size and Drilling depths (Maximum).

HQ/NQ 600 Mtr 2000 Feet
Max Drill Pipe Length 3 Mtr 10 Feet

Note: Under favorable Drilling conditions.
Power Unit
Truck engine or Deck engine with suitable Pump mounting arrangement shall power the entire hydraulic system of the rig with minimum rated power of the engine -160.0 HP @ 2100 rpm.
Mast
Sturdy Structural Box Type Mast of electrically welded construction, main members are made out of heavy duty structural steel channels reinforced with suitable cross members, so that it will be strong enough to withstand the varying drilling loads. The mast shall be provided with a provision for drilling at a angle of 45 deg. The mast is capable of handling upto 6 mtr drill pipe & casting.

Mast length 10,000 mm 256.0 Inches
Rotary Head Travel 7,000 mm 145.0 Inches
Centraliser Opening 304.8 mm 12 Inches
Reeving Ratio 1:3
Raising & Lowering With Hydraulic Cylinder

Top Head Rotary Drive
Heavy duty hydraulic driven top head rotation head unit with dual speed motor and gear box arrangement having infinitely variable speed from (0-975rpm). This unit travels on the mast and is of sturdy construction to absorb sudden & varying shock loads generally encountered during drilling operations. The rotation head gear box is also provided with slide out or swing out arrangement.
Rotary Head Output Speeds & Torques

Speeds Torques
975 rpm 55 kg m
490 rpm 110 kg m
300 rpm 315 kg m
145 rpm 630 kg m

Feed System
Feed system is provided with adequate travel for handling drill pipes and casing pipe upto 3.0 Mt. Long. The feed and hoist are actuated by a suitable hydraulic cylinder with wire rope and pulley arrangement. The feed system has the following capabilities.

Feed Cylinder ø 125 x ø 70 x 2350
Pull Up 8500 Kgf 18735 lbf
Pull Down 5800 Kgf 12780 lbf
Pull Up Speed 40 Mt/Min 132 Ft/Min
Pull Down Speed 60 Mt/Min 198 Ft/Min

Hydraulic System
The hydraulic system is designed for fuel efficient and high productive capacity. All hydraulic elements like pumps, motors, valves, and cylinders shall be of adequate capacities and of reputed makes.

Max Operating Pressure (open loop) 250 Kg/cm2
Max Operating Pressure(Closed Loop) 300 Kg/cm2
Hydraulic Tank Capacity 800 Lt
Filtration (Nom.) Return Line 10 to 25 Microns
Hydraulic Oil Cooler Fin Type Oil to Air

Mud Pump (Recommended size for Rotary Drilling)
Hydraulically driven Duplex, double acting reciprocating 5 x 4 model Mud Pump. This mud pump is suitable for handling clear water, drilling mud and bentonite solutions.

Bore (Liner) 125 mm 4 Inches
Stroke 150 mm 5 Inches
Max. Flow 523 lpm
Max. Pressure 22.6 Kg/cm2  
Drive Hydraulic motor  

Stabilizers
System consists of four hydraulic leveling jacks with Reverse flow restricted valves to ensure safe operation Two no's are at the front (Operator side) of the rig controlled by two separate valves and two jacks at the rear side of the rig controlled by single valve.

No. of Jacks Four (02 each mounted in front and rear)
Cylinder Size ø 125 x ø 63 x 610
Type Hydraulic

Recommended Air Compressor (For DTH Drilling)

Air compressor capacity 1200 CFM/320 PSI or Equivalent
Make IR (Ingersoll rand) Make or equivalent reputed make

Note:The compressor shall be mounted
on the separate truck as per the customer requirement. Air Line Lubricator (in case of DTH Drilling)

Air Flow Ccapacity 1200 CFM
Air Pressure 320 PSI
Tank Capacity 14 Lts.
Make SPINC/Equivalent make

Wire Line Hoist Assembly
Hydraulically operated winch assembly for handling tools and drill pipes.

Welding Generator
Welding generator with a capacity of 320 amps at 60% duly cycle. The welding Generator is coupled with a hydraulic motor to maintain uniform output current even at varying load requirements.

Make Swaraj ltd./equivalent
Drive Hydraulic

Rod Gripper Assly
Hydraulically operated rod gripper assembly for holding NQ drill pipes.
Breakout Wrench (For DTH & Rotary Drilling)
The Drill Rig is equipped with hydraulic breakout wrench for breaking of drill pipes and the hammer.

Cylinder Bore Diameter 80 mm
Stroke 300 mm

Note:
In view of continuous R & D and Product Improvement programme all specifications, features etc., are subject to amendments without prior notice
KLR Drilling Rigs can be supplied in custom built models in various Configurations, Mounting features to suit all special requirements and Technical specifications can be offered accordingly


 
Water Well Drilling Rigs Ethiopia, Water Well Drilling Rigs Ghana, Water Well Drilling Rigs Kenya, Water Well Drilling Rigs Uganda, Water Well Drilling Rigs Tanzania, Water Well Drilling Rigs Zambia, Water Well Drilling Rigs Nigeria, Water Well Drilling Rigs Sudan, Water Well Drilling Rigs Mauritius, Water Well Drilling Rigs Lebanon, Water Well Drilling Rigs Malawi, Water Well Drilling Rigs Senegal, Water Well Drilling Rigs Burkinofasa, Water Well Drilling Rigs Turkey, Water Well Drilling Rigs Qatar, Water Well Drilling Rigs Dubai, Water Well Drilling Rigs Sri Lanka, Water Well Drilling Rigs Bangladesh, Water Well Drilling Rigs Nepal, Water Well Drilling Rigs New Zealand, Water Well Drilling Rigs South Korea, Water Well Drilling Rigs USA, Water Well Drilling Rigs Canada and Water Well Drilling Rigs Sweden
www.drillingrigs.co.in | www.dthhammers.net | www.mudpump.co.in | www.drillrods.net | www.dthbuttonbits.net | www.rockdrillhoses.com | www.submersiblepumpsandmotors.com | www.drillingaircompressors.com | www.drillingoperators.com | www.drillingrigsforsale.in | www.rotarydrillingrigs.com | www.downthehole.in | www.waterwelldrillingrigs.com | www.useddrillingrigs.co.in | www.dthdrillingrigs.com

Dth Drilling Rigs | Rotary Drilling Rigs | Combination Drilling Rigs | Dth Cum Rotary Drilling Rigs | Blast Hole Drilling Rigs | Core Drilling Rigs | Wagon Drills | Tractor Mounted Drilling Rigs | Reverce Circulation drilling Rigs| Inwell Drilling Rigs | Trailer Mounted Drill Rig | Self Propelled Skid Mounted Rig | Diamond Core Drilling Rig | Mini Truck Mounted Drilling Rig | Hydro Facturing Equipments | Auto Loader DTH Drilling Rig | Hand Pump Drilling Rigs | Trolley Mounted Drill Rigs | Portable Drilling Rigs | Crawler Mounted Down the Hole | Water Well Drilling Rig | Hydraulic Down the Hole (Dth)Drilling Rig | Horizontal Drilling Rigs | Dual Rotary Drilling Rigs | Hydra Drills | Auger Drills | Soil Investigation Drilling Rigs | Foundation Drilling Rigs | Geothermal Drilling Rigs

 
Terms & Conditions - Disclaimer Copyright © 2009 dthrotarydrilling.com All rights reserved.