Water well Drilling Rigs - PRD 1500 R
 
TECHNICAL SPECIFICATIONS
RATED CAPACITY
Drill Pipe Hole Dia Depth
1.770 mtr ( 2540 ft ) of 5.7” Dia hole using 2.36” Dia drill rod
2.600 mtr (2000 ft ) of 6” to 8” Dia hole using 3” Dia drill rod
3.450 mtr (1480 ft ) of 8” to 10” Dia hole using 31/2” Dia drill rod drill
CASING LOAD MAST
1800 Kgs (3960 lbs ) using double sheave travelling block, dead end at frame  
CONSTRUCTION
Tubular Steel, electrically welded
HEIGHT
13 mtrs ( 43 ft ) clearance above ground
GROSS LOAD CAPACITY
31820 Kgs ( 70000 lbs )
HOOK LOAD CAPACITY
18200 Kgs ( 40000 lbs ) with double sheave traveling block
RAISING AND LOWERING
2 Nos Hydraulic cylinder

CROWN BLOCK

5 sheaves plus 1 catline sheave

DRILL HEAD
TYPE
Integral with draw-works and pull-down cycles drive through torque
tube and disc type clutch
OPENING
90 mm or 108 mm

RETRACTION

525 mm

PULL DOWN
Through 2 Nos, Hydraulic cylinders
STROKE
762 mm
FORCE
706 Kgs for each 7.03 Kg/cm2 Hydraulic oil pressure
DRAW WORKS
Barrel dia length; Single line pull Bare Drum
HOISTING DRUM
178 mm  x 216 mm  6820 Kgs
SAND STEEL
178 mm  x 216 mm  6820 Kgs
CLUTCH
406 mm 2 plate mechanical type (Air clutch optional)
BRAKES
470 mm x 100 mm mechanical high leverage type double equalised
DRIVE
By chain
TRANSMISSION SUB DRIVE CASE
HYDRAULIC
Five Speed forward, one speed reverse
Suitable for mounting automotive gear box and to obtain Hi - pump drive
MUD PUMP
Pump - fixed displacement vane type discharge & pressure 80 LPM at
70.3 Kg/cm2
MODEL
Standard                   Optional
STROKE x LINEAR SIZE
PRDM - 150                PRDM - 200
150mm x 140mm         200mm x 150mm
DISCHARGS & PRESSURE
885 lpm at 17.79 kg2 1361 lpm at 17.79 Kg/cm2
DRIVE
Chain / "V" Belts
CLUTCH
Clow Clutch or 203 mm, 3 plates mechanical
LEVELING JACK
4 Nos, mechanical (optional hydraulic)
LIGHTING
From truck battery or dynamo, optional separate lighting generator
CONTROLS
Conveniently located
PRIME MOVER
Truck mounted version all components driven by same truck engine
through PTO Skid /trailer mounted version through ALU 400 diesel engine
MOUNTING
TATA /Ashok Leyland 4x2 or 4x4 truck chasis or trailer mounted
OPTIONAL AVAILABLE
Hydraulic break-out, welding generator, auto pull-down chuck, DTH
attachment wire lines hoist and higher rotary speed upto 750 RPM for
core drilling purposes
 

Contact Details

PRD RIGS INDIA
(Export Unit of Paranthaman Exporters)
351, Sankari road
Tiruchengode - 637209

Tel : + 91 - 4288 256455, 256435
Fax : + 91 - 4288 251645
Email : myrig@prdrigs.com

Visit:http://www.prdrigs.com

Mr. T.T. PARANTHAMAN
Managing Director
Mobile : + 91 - 9843110011
Ms. ARTHI
Marketing Head
Mobile : + 91 - 9786665888
 
 
 
 
 
 
PRD EXPORTERS - Manufacturer Exporters and Suppliers of Water Well Drilling Rigs Capacity 1500
 
 
Terms & Conditions - Disclaimer Copyright © 2009 dthrotarydrilling.com All rights reserved.